最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
用納米壓痕儀測量Cu50Zr43Ti7非晶合金的硬度和彈性模量
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:

江西省自然科學基金(2007GZC0712)資助


Measurements of Hardness and Elastic Modulus by Nanoindenter for Cu50Zr43Ti7 Amorphous Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    用Berkovich和Cube-Corner壓頭分別測量了Cu50Zr43Ti7非晶合金的硬度(H)和彈性模量(E)。結果發現，該合金的H和E與壓頭形狀及測量所用載荷無關，H=(6.5±0.2) GPa，E=(114.4±2.1) GPa；相對于Berkovich壓頭，用Cube-Corner壓頭得到的壓痕周圍觀察到較多的剪切帶。該合金沒有硬度的尺寸效應，變形也沒有明顯的加工硬化。用有限元(FE)計算得到該合金的屈服強度(s)約為1.8 GPa，與壓縮試驗結果相符。

    Abstract:

    Nanoindentation tests have been performed for Cu50Zr43Ti7 bulk metallic glass with a Berkovich indenter and a cube-corner indenter, respectively. It is found that the measured hardness (H) of (6.5±0.2) GPa and the elastic modulus (E) of (114.4±2.1) GPa are independent of the indenter tip shape and the applied indentation loads used in the tests. Many shear bands were observed around the impressions by the cube-corner indenter if compared to with the Berkovich indenter for the alloy without the indentation-size effect (ISE) and strain hardening during the indentation tests. The yield strength (s) of the alloy is about 1.8 GPa by finite element (FE) calculation, good agreement with the experimental results.

    參考文獻
    相似文獻
    引證文獻
引用本文

黎業生,李 洪,馬永紅,謝 駿,王家佳.用納米壓痕儀測量Cu50Zr43Ti7非晶合金的硬度和彈性模量[J].稀有金屬材料與工程,2009,38(1):147~150.[Li Yesheng, Li Hong, Ma Yonghong, Xie Jun, Wang Jiajia. Measurements of Hardness and Elastic Modulus by Nanoindenter for Cu50Zr43Ti7 Amorphous Alloy[J]. Rare Metal Materials and Engineering,2009,38(1):147~150.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2008-01-18
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: