最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
活化鉬-錳法連接高純Al2O3陶瓷／不銹鋼
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

TB756

基金項目:

國家“973”重大基礎研究計劃（2006CB601200）資助項目


Joining of High Purity Al2O3 to Stainless Steel by Activated Molybdenum-Manganese Process
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用活化鉬-錳路線，使用72Ag28Cu（質量分?jǐn)?shù)，下同）釬焊制備了高純Al2O3陶瓷／不銹鋼接頭。利用SEM對金屬化陶瓷的顯微結構、元素分布進行了分析，并討論活化鉬-錳法的金屬化機理。考察了金屬化工藝、鍍鎳及鍍后熱處理對接頭剪切強度和釬焊效果的影響。結果表明：玻璃相遷移和化學反應對活化Mo-Mn金屬化起主要作用，金屬化層燒結起輔助作用，且玻璃相遷移主要為由金屬化層向陶瓷體方向。在最優工藝條件下，接頭最大剪切強度達115 MPa，平均強度高于97MPa。薄的鍍鎳層有助于焊料浸濕金屬化層和阻止焊料腐蝕金屬化層。鍍后熱處理也可顯著提高接頭強度。

    Abstract:

    High purity alumina/stainless steel joints were produced by activated molybdenum -manganese route using 72Ag28Cu solder. The microstructure and elemental distribution of metallized ceramic were analyzed, and the mechanism of metallization was discussed. Influences of the metallizing technologic conditions, Ni plating and subsequent annealing on the joint shear strength were investigated. The results show that both glassy phases migration and chemical reaction act the key roles for activated Mo-Mn metallizing, but sintering of the metallized layer acts the secondary role, and the main direction of glass migration is from the metallzed layer to the ceramic matrix. The maximum of the joint shear strength under the optimized conditions reaches 115 MPa, and the average strength is over 97 MPa. A thin Ni coating will prevent the metallized layer from being wetted by the solder in resulting avoiding the erosion of the layer by the solder. The annealing after plating could improve markedly the strength of the ioints.

    參考文獻
    相似文獻
    引證文獻
引用本文

劉桂武 喬冠軍 王紅潔 金志浩 盧天健.活化鉬-錳法連接高純Al2O3陶瓷／不銹鋼[J].稀有金屬材料與工程,2007,36(5):920~923.[Liu Guiwu, Qiao Guanjun, Wang Hongjie, Jin Zhihao, Lu Tianjian. Joining of High Purity Al2O3 to Stainless Steel by Activated Molybdenum-Manganese Process[J]. Rare Metal Materials and Engineering,2007,36(5):920~923.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:2006-09-06
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: