最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
激光快速成形Ti-6Al-4V合金力學性能
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

TG146.23

基金項目:

國家自然科學基金（50331010）;西北工業大學英才培養計劃（05XE0131）;西北工業大學青年教師創新基金（W016212）


Mechanical Properties of Ti-6Al-4V Alloy by Laser Rapid Forming
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    采用實驗研究的方法，對激光快速成形Ti-6Al-4V合金的力學性能進行了探討。結果發現：和鍛造件相比，激光快速成形沉積態Ti-6Al-4V合金的拉伸性能具有高強低塑特點和更顯著的各向異性；成形試樣的組織、氧含量和冶金缺陷都將影響到拉伸性能，其中組織的影響最顯著，其次為氧含量和熔合不良缺陷：對于氧含量符合GJBGJB2921-1997標準的激光快速成形Ti-6Al-4V合金，經固溶時效熱處理后所獲得的網籃組織綜合性能最好，不論是強度指標還是塑性指標都高于鍛件標準。

    Abstract:

    The mechanical properties of Ti-6Al-4V alloy by laser rapid forming (LRF) have been investigated. The results show that the mechanical properties of the as-deposited Ti-6Al-4V alloy have the characteristics of higher strength, lower ductility and more distinct anisotropy properties as compared to wrought. The microstructure, content of oxygen and metallurgical flaw of the laser formed samples will have effect on the tensile test results. It is the microstructures that play crucial roles on the mechanical properties, while the oxygen content and ill-bonding flaw are in the next place. For the LRF Ti-6Al-4V alloy with the oxygen content meeting GJB GJB2921-1997, a basket weave microstructure obtained through the solution-aging treatment brings forth the best mechanical properties. Not only the strength but also the ductility is over than that of the wrought specification.

    參考文獻
    相似文獻
    引證文獻
引用本文

陳靜 張霜銀 薛蕾 楊海歐 林鑫 黃衛東.激光快速成形Ti-6Al-4V合金力學性能[J].稀有金屬材料與工程,2007,36(3):475~479.[Chen Jing, Zhang Shuangyin, Xue Lei, Yang Haiou, Lin Xin, Huang Weidong. Mechanical Properties of Ti-6Al-4V Alloy by Laser Rapid Forming[J]. Rare Metal Materials and Engineering,2007,36(3):475~479.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:2006-11-02
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: