最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
半固態加工技術制備金屬合金粉末
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

TG244

基金項目:

國家自然科學基金.(50071048,50201012)及西北工業大學博士生創新基金(GrancNo.59825108)


Metal Alloy Powder Produced by Semi-Solid Processing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    采用自制半固態攪拌裝置研究了Sn.15Pb(質量分?jǐn)?shù),%下同)合金在攪拌條件下固相分?jǐn)?shù)大于0.6時的連續冷卻凝固行為。組織分析結果表明:當攪拌停止溫度在合金固相線溫度附近時,所獲半固態組織出現非常明顯的液固兩相分離現象,且所獲固相組織為分散的類球狀顆粒。利用此現象,獲得了一種新型金屬合金粉末制備方法一半固態金屬合金粉末制備法。采用該方法可以實現粉末顆粒內部無夾雜、無孔洞,外部裹有低熔點共晶薄膜。顆粒為以單晶方式生長的金屬合金粉末。

    Abstract:

    Using self-made semi-solid mechanical stirring process system, the solidification behavior of Pb-15wt% Sn alloy semi-solid slurry with solid fraction beyond 0.6 was investigated under stirring condition. A detailed microstructural analysis of the solid phase was carried out. The results show that the solid-liquid separation is obvious in the samples with the solid fraction beyond 0.6 and the solid phase is dispersed quasi-globular particles. Based on these results, a kind of single-crystal powders coated with Pb-Sn eutectic was made by continuous stirring and cooling under the semi-solid state and a new method for preparing metal powder is developed. The analysis and discussion indicate that this approach can reduce the content of oxide and impurity in the powder.

    參考文獻
    相似文獻
    引證文獻
引用本文

李濤 林鑫 陳光 黃衛東.半固態加工技術制備金屬合金粉末[J].稀有金屬材料與工程,2007,36(1):153~156.[Li Tao, Lin Xin, Chert Guang, Huang Weidong. Metal Alloy Powder Produced by Semi-Solid Processing[J]. Rare Metal Materials and Engineering,2007,36(1):153~156.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:2006-01-10
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: