最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
Ni-Cr/BN自潤滑材料摩擦磨損機理分析
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

TG135.6

基金項目:


Analyses of Frictional Wear Mechanics of Ni-Cr/BN Self-Lubricating Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    采用粉末冶金熱壓方法制備了不同BN含量的Ni-20Cr自潤滑材料,用掃描電鏡和金相顯微鏡觀察了磨損表面和斷口形貌,研究了不同熱壓溫度、不同BN含量對材料力學和摩擦學性能的影響。研究結果表明:隨著溫度的升高,Ni—Cr/BN固體自潤滑材料的孔隙率減少,力學和摩擦學性能增強;Ni-Cr/10%BN摩擦性能比Ni—Cr/11%BN差的原因可能是BN含量的減少使摩擦表面不能形成連續的潤滑膜或者潤滑膜在摩擦?xí)r剝落后不能及時補充,使平均摩擦系數和磨損量增加。

    Abstract:

    The nickel based self-lubricating materials containing different contents of BN were prepared by not-pressing technology of powder metallurgy. The morphologies of worn surfaces and the fracture were analyzed by scanning electron microscopy and metallurgical microscope. The influences of different hot-pressing temperature and contents of BN on mechanical and tribological properties of the material were studied. The results showed that increasing of hot-pressing temperature leaded to good mechanical properties and tribological properties of material as well as the decreasing of porosity. The Ni-Cr/10%BN had worse tribological properties compared with Ni-Cr/11%BN because decreasing of content of BN cannot form continuous lubricating film on the friction surface or the flaking lubricating film can not be supplied on time.

    參考文獻
    相似文獻
    引證文獻
引用本文

馮艷 王日初 余琨. Ni-Cr/BN自潤滑材料摩擦磨損機理分析[J].稀有金屬材料與工程,2007,36(10):1820~1823.[Feng Yan, Wang Richu, Yu Kun. Analyses of Frictional Wear Mechanics of Ni-Cr/BN Self-Lubricating Composites[J]. Rare Metal Materials and Engineering,2007,36(10):1820~1823.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:2006-09-20
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: