最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
試樣尺寸對Al2O3陶瓷/Nb釬焊接頭應力場分布的影響
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

TG146.4

基金項目:

江蘇省船舶先進設計制造技術重點實驗室資助


Effect of Specimen Size on the Residual Stress of Al2O3 and Nb Brazed Joint
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    采用數值模擬的方法研究了試樣尺寸對Al2O3陶瓷和Nb釬焊接頭殘余應力場分布的影響,研究發現試樣尺寸變化會對接頭的殘余應力場產生一定的影響.當試樣尺寸在高度H方向上不斷增加時,殘余應力分布趨勢基本不變,只是應力峰值有所增加,且當高度H增加到一定值時(在本研究中H=10mm),其變化不再影響殘余應力的分布,應力峰值不再增加.當試樣尺寸在寬度W方向上增加時,殘余應力也是呈現不斷增加的趨勢,當試樣寬度W增加到25mm后,殘余應力峰值開始下降.所以適當增加試樣尺寸可有效降低試樣中殘余應力分布,對接頭設計有益.

    Abstract:

    Effect of specimen size on the residual stress distribution of Al2O3/Nb joint is studied using numerical analysis. It can be concluded that the difference of specimen size can greatly influence the stress distribution. When the height of the specimen increased, the residual stress did not change evidently, and the residual would not change any more with the height increased to some degree with the width of specimen increasing, the residual stress increased firstly. But when the width reached 25 mm, the residual stress decreased instead. In conclusion, increasing specimen size is beneficial to both residual stress decrease and structure design in practice.

    參考文獻
    相似文獻
    引證文獻
引用本文

李瑞峰 于治水 祁凱 梁超 吳銘方.試樣尺寸對Al2O3陶瓷/Nb釬焊接頭應力場分布的影響[J].稀有金屬材料與工程,2005,34(3):401~404.[Li Ruifeng, Yu Zhishui, Qi Kai, Liang Chao, Wu Mingfang. Effect of Specimen Size on the Residual Stress of Al2O3 and Nb Brazed Joint[J]. Rare Metal Materials and Engineering,2005,34(3):401~404.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:2003-09-23
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: