最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
氧含量及過熱度對鑄態Zr_(52.5)Cu_(17.9)Ni_(14.6)Al_(10)Ti_5大體積玻璃合金微觀組織結構及力學性能的影響
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

TG139

基金項目:


Effect of Oxygen Impurity and Overheating on Microstructure and Mechanical Properties of As-cast Zr_(52.5)Cu_(17.9)Ni_(14.6)Al_(10)Ti_5 Bulky Glass Alloys
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    利用射流成型法制備了厚度為２ｍｍ的Ｚｒ５２．５Ｃｕ１７．９Ｎｉ１４．６Ａｌ１０Ｔｉ５金屬玻璃薄板，通過控制氧含量和過熱度來改變 玻璃薄板中淬態結晶相的體積分?jǐn)?shù)。研究表明：低的氧含量水平和高的過熱度有利于提高該合金的玻璃形成能力，形 成完全非晶的合金；完全非晶的 ２ｍｍＺｒ５２．５Ｃｕ１７．９Ｎｉ１４．６Ａｌ１０Ｔｉ５大體積金屬玻璃薄板其斷裂應力為 １７１０ＭＰＳ，彈性模量為 ８０ＧＰａ，彈塑性為２．２％。提高合金中的氧含量水平或者降低熔體過熱度都有利于結晶相析出?；w中出現２％和６％的結晶相時，斷裂應力分別降為１５８ＭＰａ和１２２０ＭＰａ．淬態結晶相的析出改變了Ｚｒ５２．５Ｃｕ１７．９Ｎｉ１４．６Ａｌ１０Ｔｉ５大體積金屬玻 璃剪切流變的變形方式，使材料脆斷。

    Abstract:

    Zr52. 5Cu17. 9Ni14.6Al1.0Ti5 bulky glass sheets with thickness of 2mm were prepared by a water-cooled copper mold casting. The volume fraction of quenched-in crystallines were controlled by changing oxygen impurity content and overheating level. The results show: low oxygen content and enough large overheating level can improve the glass formation ability of the present ahoy. Fully amorphous sheet with a thickness of 2mm displays high fractured strength (1 710MPa). Samples with volume fraction of 2% still have high fractured strength (1 580MPa), but that of samples with volume fraction of 7% reduce rapidly to 1 220MPa. The reason for decreasing of fracture strength is that quenched-in crystals embedded on the amorphous matrix induce initiation and propagation of crack.

    參考文獻
    相似文獻
    引證文獻
引用本文

邊贊,何國,陳國良.氧含量及過熱度對鑄態Zr_(52.5)Cu_(17.9)Ni_(14.6)Al_(10)Ti_5大體積玻璃合金微觀組織結構及力學性能的影響[J].稀有金屬材料與工程,2001,(3).[Bian Zan, He Guo, Chen Guoliang. Effect of Oxygen Impurity and Overheating on Microstructure and Mechanical Properties of As-cast Zr_(52.5)Cu_(17.9)Ni_(14.6)Al_(10)Ti_5 Bulky Glass Alloys[J]. Rare Metal Materials and Engineering,2001,(3).]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: