最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
MIM工藝對W—Ni—Fe高密度合金力學性能的影響
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

TF125.241

基金項目:

國家863高技術計劃資助,國家教委“跨世紀優秀人才計劃”基金


Effect of MIM Processing on the MechanicalProperties of TungstenNickelIron Heavy Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    研究了粉末裝載量和燒結溫度對ＭＩＭ鎢基高密度合金力學性能的影響，并將ＭＩＭ工藝與傳統壓制／燒結工藝進行了比較，實驗結果表明，采用裝載量為４７％（體積分?jǐn)?shù)）的喂料，在１５３０℃燒結２ｈ得到的９７Ｗ－２Ｎｉ－１Ｆｅ高密度合金具有優良的力學性能的達到的性能為σｂ＝９３６ＭＰａ，σ０．２＝６４９ＭＰａ，δ＝１１．４％，ＨＲＣ＝３１，優于傳統壓制／燒結工藝制得的合金。

    Abstract:

    The effects of powder loading and sintering temperature on the mechanical properties of a metal injection molded (MIM) tungsten heavy alloy are studied. The properties of MIM products are compared with those of traditional pressed/sintered products with the same compositions. The following optimal properties have been attained for the 97W 2Ni 1Fe alloy made by the MIM process with a powder loading of 47vol% and sintered at 1 530 for 2 hrs: b=936 MPa,02=649 MPa,=114%,HRC=31 They are much better than those of pressed/sintered alloy.

    參考文獻
    相似文獻
    引證文獻
引用本文

曲選輝 毛金英. MIM工藝對W—Ni—Fe高密度合金力學性能的影響[J].稀有金屬材料與工程,1999,(3):166~170.[Qu Xuanhui, Li Zhiling, Li Yiming, Qiu Guanghuan. Effect of MIM Processing on the MechanicalProperties of TungstenNickelIron Heavy Alloy[J]. Rare Metal Materials and Engineering,1999,(3):166~170.]
DOI：[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: