最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

+高級檢索
影響多孔鎢孔隙度的因素
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

TF125.6

基金項目:


Study of Some Factors Effecting the Porosity of Porous Tungsten
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    研究了粉末粒度,壓制壓力及燒結溫度等對多孔鎢孔隙度的影響,結果表明,對同一粒度粉末壓坯,孔隙隨著壓制壓力的增大而減少;在相同壓力下,粗粉壓坯的孔隙度小于細粉壓坯的孔隙度。當燒結溫度和燒結時間相同時,細粉多孔鎢的孔隙度要小于粗粉多孔鎢的孔隙度,對同粒度粉末,壓坯孔隙度隨燒結溫度升高而減小。

    Abstract:

    Some factors effecting the porosity of porous tungsten, such as powder size, press pressure, sintering temperature, and so on, are discussed in detail. It is found that the porosity of the pressed blank is not only connected with the press pressure, but also with the size of tungsten powder. For the same size of powder, the porosity of the pressed blank decreases with the increase of pressing pressure. The porosity of pressed blank of coarse powder is smaller than that of fine powder for the same pressure. If the sintering temperature and time are the same, the porosity of porous tungsten made by fine powder is smaller than that of the coarse one. For the same size powder, the porosity of the pressed blank decreases with increase of sintering temperature. Therefore, the powder size and sintering temperature are major factors for the porosity of porous tungsten. The smaller the size of the powder and the higher the sintering temperature, the less the porosity of porous tungsten.

    參考文獻
    相似文獻
    引證文獻
引用本文

滕修仁 張晗亮.影響多孔鎢孔隙度的因素[J].稀有金屬材料與工程,1998,(6):379~380.[Teng Xiuren, Zhang Hanliang. Study of Some Factors Effecting the Porosity of Porous Tungsten[J]. Rare Metal Materials and Engineering,1998,(6):379~380.]
DOI:[doi]

復制
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期:
  • 出版日期: