最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

兩種3D打印用霧化Ti-6Al-4V粉末的對比研究
DOI:
作者:
作者單位:

西北有色金屬研究院

作者簡介:

通訊作者:

中圖分類號:

基金項目:

國家重點研發計劃項目(2017YFB0305800),國家自然科學(51604228)


Comparative Study of Two Kinds of Atomized Ti-6Al-4V Powders for 3D Printing
Author:
Affiliation:

1.State Key Laboratory of Porous Metal Materials,Northwest Institute for Nonferrous Metal Research,Xi’an 710016;2.China

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    本研究分別利用水冷銅坩堝真空感應熔煉氣霧化(VIGA-CC)和等離子旋轉電極(PREP)兩種技術制備出球形Ti-6Al-4V合金粉末,作者利用SEM、同步輻射CT掃描-三維重建和氬氣含量測試等分析手段對不同粒徑的Ti-6Al-4V合金粉末的孔洞缺陷和氬氣含量、硬度值進行了表征。實驗結果表明, VIGA-CC粉末粒度分布寬,細粉收得率較多,粉末粒度分布在40~180 μm之間, PREP粉末的粒度分布較窄,主要集中在110~180 μm之間；金屬粉末內部的孔隙率、氣體含量和孔尺寸隨著粉末粒度的增大而增大,且同一粒徑范圍內VIGA-CC粉末的氣孔概率多于PREP粉末；隨著粉末粒徑減小,粉末截面組織逐漸細化,其硬度值逐漸升高,整體上VIGA-CC粉末硬度值高于PREP粉末。

    Abstract:

    In this study, spherical Ti-6Al-4V alloy powders were prepared by vacuum induction melting (VIGA-CC) in a water-cooled copper crucible and plasma rotating electrode (PREP). The void defects, argon content and hardness of Ti-6Al-4V alloy powders with different particle sizes were analyzed by means of SEM, synchrotron radiation CT scanning-three-dimensional reconstruction and argon content measurement. The experimental results show that the particle size distribution of VIGA-CC powder is between 40 and 180 microns. The particle size distribution of PREP powder is narrow, mainly between 110 and 180 microns. The VIGA-CC powders exhibited higher fraction of fine powders compared with PREP powders. The porosity, Ar content and pore size of metal powder increase with the increase of particle size, and the pore size of VIGA-CC powder is larger than PREP powders within the same particle size range. With decreasing the particle size, the cross-section structure of the powder becomes finer, and resulting in the increase of the hardness value. Overall hardness value of VIGA-CC powder is higher than that of PREP powder.

    參考文獻
    相似文獻
    引證文獻
引用本文

趙少陽,談 萍,湯慧萍,王 建,殷京甌,李增峰,王利卿,李 燁.兩種3D打印用霧化Ti-6Al-4V粉末的對比研究[J].鈦工業進展,2019,36(4).

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:2019-01-24
  • 最后修改日期:2019-02-19
  • 錄用日期:2019-02-20
  • 在線發布日期: 2020-10-22
  • 出版日期: