最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

TC16鈦合金板材冷軋工藝及組織性能研究
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Research on Volatilization Law of Multi-component Titanium Alloy in Electron Beam Cold Hearth Melting
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    進行了TC16鈦合金板材多道次冷軋?jiān)囍?利用光學顯微鏡、掃描電鏡和X射線衍射等手段研究了變形量對冷軋板材微觀組織與力學性能的影響。結果表明:α+β兩相TC16鈦合金板材冷軋加工是可行的,其極限冷變形量達到79%,冷軋板材表面無裂紋。大幅度冷軋變形后,TC16鈦合金組織為分布均勻的纖維狀結構,且存在極少量未充分變形的α晶粒,并伴有應變誘導的α″馬氏體相產生;抗拉強度和顯微硬度均得到較大程度的提高,發生明顯的冷形變強化。

    Abstract:

    The multi-pass cold-rolled tests of TC16 titanium alloy sheets were produced. The effect of deformation on microstructures and mechanical properties of cold-rolled sheets were studied by optical microscope,scanning electron microscope and X-ray diffraction. The results show that the cold rolling of α + β two-phase TC16 titanium alloy sheets is feasible,and the limit cold deformation can reach 79% without any cracks on the surface. After large-scale cold rolling deformation,the TC16 titanium alloy microstructure becomes a uniformly distributed fibrous structure,and they are few incompletely deformed α grains,accompanied by strain-induced α″ martensitic phase. Meanwhile,the improvement of tensile strength and microhardness,and obvious cold deformation strengthening is obtained.

    參考文獻
    相似文獻
    引證文獻
引用本文

劉志強;張青來;韓偉東;柏秋生;. TC16鈦合金板材冷軋工藝及組織性能研究[J].鈦工業進展,2021,38(1):20-24.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2021-03-16
  • 出版日期: