最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

熱處理對激光選區熔化TC4鈦合金顯微組織和力學性能的影響
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Influence of Heat Treatment on Microstructure and Mechanical Properties of TC4 Titanium Alloy Fabricated by Selective Laser Melting
Author:
Affiliation:

Fund Project:

  • 摘要
    • |
  • 圖/表
    • |
  • 訪問統計
    • |
  • 參考文獻
    • |
  • 相似文獻
    • |
  • 引證文獻
    • |
  • 資源附件
    • |
  • 文章評論
    摘要:

    研究了激光選區熔化(SLM) TC4鈦合金沉積態和退火態顯微組織的特征及其對力學性能的影響規律。結果表明:合金組織沿激光選區熔化成形高度方向呈現外延生長,形成柱狀晶,晶內存在大量的針狀馬氏體α'相。退火后,晶內的針狀α'相轉變?yōu)棣?β板條組織。隨著退火溫度的升高,組織中α相含量逐漸降低,α片層逐漸粗化,β相含量逐漸升高;室溫拉伸強度逐漸降低,塑性逐漸升高,顯微硬度逐漸降低。經過800℃×2 h/FC退火熱處理后,激光選區熔化成形TC4鈦合金具有最佳的強度與塑性匹配。

    Abstract:

    TC4 titanium alloy was fabricated by selective laser melting( SLM). The influence of annealing treatment on the microstructure and mechanical properties were investigated in details. The results show that the microstructure as epitaxial growth columnar with fine acicular martensite phase. After annealing treatment,the microstructure changes from martensite phase to staggered basketweave α + β microstructure. With the increasing of annealing temperature,the content of α phase decreases,the size of α phase and the content of β phase both increases. With the increasing of annealing temperature,the room temperature tensile strength and micro-hardness decrease and the plasticity increases.The better strength/plasticity matching of TC4 titanium alloy formed by SLM can be obtained by the annealing heat treatment of 800 ℃ × 2 h/FC.

    參考文獻
    相似文獻
    引證文獻
引用本文

蔡雨升;吉海賓;雷家峰;楊銳.熱處理對激光選區熔化TC4鈦合金顯微組織和力學性能的影響[J].鈦工業進展,2020,37(1):9-16.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2024-02-22
  • 出版日期: