最新色国产精品精品视频,中文字幕日韩一区二区不卡,亚洲有码转帖,夜夜躁日日躁狠狠久久av,中国凸偷窥xxxx自由视频

真空退火對TC4鈦合金表面Ti/TiN多層復合涂層性能的影響
DOI:
作者:
作者單位:

作者簡介:

通訊作者:

中圖分類號:

基金項目:


Effect of Vacuum Annealing on Properties of Ti/TiN Composite Coating Deposited on TC4 Titanium Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 圖/表
  • |
  • 訪問統計
  • |
  • 參考文獻
  • |
  • 相似文獻
  • |
  • 引證文獻
  • |
  • 資源附件
  • |
  • 文章評論
    摘要:

    金屬基體材料表面硬質膜層在服役過程中,殘余應力在膜基界面以及膜層內部界面之間的積聚會導致膜層發生界面剝落失效。以TC4鈦合金基體表面Ti/TiN多層復合膜層為研究對象,探討真空退火對復合膜層結構及性能的影響,并表征退火前后復合膜層的界面劃痕失效以及抗粒子沖蝕性能。結果表明,真空退火促進了膜層內部以及膜基界面兩側原子的熱擴散,使得界面結構特征明顯弱化。界面狀態的改變使得復合膜層的表面顯微硬度降低以及膜基結合強度提高。在劃痕載荷作用下,復合膜層抵抗裂紋沿界面擴展的能力得到增強。真空退火有助于提高膜層的強韌性匹配,可有效抵抗小角度沖蝕粒子的犁削以及大角度粒子沖蝕下的疲勞,因此Ti/TiN多層復合膜層表現出較好的抗沖蝕性能。

    Abstract:

    Hard coatings deposited on metal substrates often occur crack and delamitation due to the higher residual stress accumulated on the interface of coating/substrate and also the inside of the coating. The effect of vacuum annealing on multilayered Ti/TiN coating deposited on TC4 titanium alloy substrate was studied in detail. Also the interface cracks under scratch load and sand erosion resistance were characterized. The results show that a multilayered Ti/TiN coating with weakened interface characteristic is obtained due the atoms diffusion on both side of the interface,which results in a decrease of hardness and increase of bonding strength. At the scratch load,the resistance of crack expansion along the interface is strengthened. And also the sand particles' "micro cutting"at small angle and fatigue effect at higher angle are restrained,so the sand erosion resistant of the annealed Ti/TiN coating is reinforced.

    參考文獻
    相似文獻
    引證文獻
引用本文

.真空退火對TC4鈦合金表面Ti/TiN多層復合涂層性能的影響[J].鈦工業進展,2018,35(6):36-40.

復制
分享
文章指標
  • 點擊次數:
  • 下載次數:
  • HTML閱讀次數:
  • 引用次數:
歷史
  • 收稿日期:
  • 最后修改日期:
  • 錄用日期:
  • 在線發布日期: 2019-03-01
  • 出版日期: